首页 > 行业新闻

郑州奥特科技有限公司

2016/07/01

工业4.0,中国制造2025已经成为大国重器的强国战略,从互联网+到新材料、新能源、新技术的产业变革,从自动化到智能化的制造业改造升级,再到信息化与工业化的深度融合,中国制造业正经历全球第四次工业革命的浪潮,顺应时代发展,郑州奥特科技异军突起,成为集中润滑行业一个新的价值标杆。简介:

AL50集中润滑系统是奥特科技研发团队在总结多年商用车领域集中润滑技术应用基础上对国内同行产品的系统创新升级,其涉及的发明专利达5项,其定时定量、自动润滑的技术特点可为机械维护节省95%的人工,延长润滑部件寿命达60%以上,节约油脂达70%以上。AL50产品一经上市,在全国商用车市场受到广大用户的一致肯定,目前在北上广、深圳、武汉、郑州等各大城市市场占有率已达80%以上。

AL50集中润滑系统为干油集中润滑系统,主要由监控单元和供脂单元组成,监控单元由监控器和传感器通过线路控制系统工作;供脂单元由供脂泵站和分配器组通过管路附件把设备上分布的数十个油脂润滑点连成一完整的封闭系统。系统在设备工作过程中自动地向各摩擦副定时定量强制供油,以确保各摩擦副润滑良好。

创新点:

1、采用活塞式压力油箱,常年泵送0#油脂,油脂利用彻底,不抽空,不变质。油箱容积可根据需要进行系列延伸设计调整,油箱具有装配互换性特点;设置油箱溢流阀,有效保护油箱不受损坏;

2、泵体防水性能好,能有效避免低洼积水条件下污水进入油箱污染润滑脂;

3、首创滑阀式全金属卸荷阀结构,性能更稳定。系统配置新型加压式分油器,供油压力高、性能稳定、润滑更到位;

4、根据需要可设置远程智能调整供油参数功能,以适应润滑点的不同润滑要求(选配);

5、避免环境污染和油脂浪费,与同类产品相比,延长设备使用寿命达4倍以上,减少维护量,提高综合效益。

6、外观新颖,结构紧凑,特别适合低底盘车辆。

“Industry 4.0” “Made in China 2025” have become the important strategy for the big and powerful countries. From Internet+ to industry innovation of new material, new resource and new technology, from automation to intelligent promotion of manufacturing industry, and the deep combination of informatization and industrialization, China manufacturing industry is surfing the whole world Industry 4.0. Conforming to the development of the times, Zhengzhou Auto Technology has become a new value benchmark of centralized lubrication industry.

Brief introduction:

AL50 type centralized Lubrication system (CLS) (hereinafter referred to as CLS) is the perfect upgrade from lubrication application of vehicles industry after many years research and analyzing by Autol R&D group, with 5 items patents. Which can save 95% labour cost, prolong 60% friction pairs, and save 70% grease. AL50 product appeared in the national commercial vehicle market was unanimously endorsed by the majority of users, with 80% market share in main cities like Beijing, Shanghai, Guangzhou, Shenzhen, Wuhan, Zhengzhou and so on.

AL50 CLS is grease type, mainly consisted of monitor unit and grease feeding unit; and grease feeding unit is one enclosed lubrication system consisted of grease pump, distributors and dozens of lubrication points connected by pipes. The CLS automatically pumps the grease to the friction pairs of working equipment for assuring friction pairs’ enough lubrication.

Main Innovations:

1. Autol pump with spring piston can deliver NLGI-0# grease all year round, Its initiative structure ensures the grease to be used completely avoiding evacuation and degradation. The capacity of pump reservoir can be adjusted as required. There is an overflow valve in the reservoir that protects the reservoir from damage.

2. The whole pump has the perfect water-proof performance which can effectively avoid dirt water into reservoir under the low-lying water.

3. Autol originated the relief valve with slide valve type which has more stable performance. The AL50 system is deployed with new type pressurized distributors, which have high pumping pressure, stable performance and good lubrication effect.

4. The lubrication data can be adjusted as required via remote computer system, in order to adapt to different requirements of lubrication.

5. Autol AL50 system avoids circumstance pollution and grease waste. Compared with similar products in market, it can prolong the service life of equipment more than 4 times, decrease maintenance  cost and increase comprehensive efficiency.

6. AL50 pump is especially suitable for vehicles with low chassis for its compact structure.